Skip to content
binho.io (opens in a new tab)Contact Us

Download & Installation

Mission Control 2 runs on Windows, macOS and Linux. It is the previous Binho desktop app, for the Binho Nova, Supernova and Pulsar.

Download the installer for the operating system from the Mission Control page, or from the public releases repository:

https://github.com/binhollc/MissionControl2-releases/releases

  • macOS: download the BinhoMissionControl2-Setup-x.y.z-arm64.dmg file for Apple silicon or the BinhoMissionControl2-Setup-x.y.z-x64.dmg file for Intel. Mount it and drag the application to the Applications folder.
  • Linux: download the Binho-Mission-Control-2-x.y.z.AppImage file, make it executable with chmod +x, then run it.
  • Windows: download the Binho-Mission-Control-2-Setup-x.y.z.exe file and run the installer.

The .blockmap and .yml files are not needed to install. They are used for update checks and differential updates.

Windows Defender SmartScreen can show a prompt when the installer runs. Click “More Info” and then the “Run Anyway” button to continue. Binho software releases are code-signed; SmartScreen can still show this prompt for a new release.

On the first connection to a virtual COM port, check that the user account has permission to use it. If the adapter does not connect:

  • Driver conflicts: make sure no other driver is installed that claims the same device.
  • Access permissions: check that the app is allowed to access USB devices in System Settings, under Privacy & Security.
  • Cable: try a different USB cable, one that carries data.

On Linux, connecting to the adapter can fail with a USB access permission error, because USB devices are not open to user-level access by default. Mission Control 2 detects this and shows instructions. To grant the permissions:

  1. Open a terminal.

  2. Create a new user group named ‘binho’ and add the current user to this group:

    sudo groupadd binho
    sudo usermod -a -G binho $USER
  3. Add a new udev rule to set the correct permissions for Binho devices:

    echo 'SUBSYSTEM=="usb", MODE="0666", GROUP="binho"' | sudo tee /etc/udev/rules.d/99-binho.rules
  4. Reload the udev rules. If this does not work, reboot the system:

    sudo udevadm control --reload
    sudo udevadm trigger
  5. Once done, a confirmation message appears:

    echo "USB device configuration has been installed. Please log out and log back in or reboot."

After these steps, Mission Control 2 can open the adapter.

Plug the adapter into the computer with the supplied USB cable, then launch Mission Control 2. The adapter is ready to use.