Binho Supernova: FAQ
Short answers to common questions about the Binho Supernova.
What protocols does the Supernova support?
Section titled “What protocols does the Supernova support?”- I3C: controller and target, including HDR-DDR
- I2C: controller and target
- SPI: controller and target
- UART: yes
- GPIO: yes
For RS-485, CAN-FD and 1-Wire, see the Binho Pulsar.
How each protocol works on the Supernova: Protocols. All adapters side by side: Protocols and Interfaces.
Where can I find the Supernova datasheet?
Section titled “Where can I find the Supernova datasheet?”Product datasheets and other technical documents are in the document library at my.binho.io. Sign in to download them.
Can I use more than one Supernova at the same time?
Section titled “Can I use more than one Supernova at the same time?”Yes. Each adapter enumerates as its own USB device (HID), and each has its own serial number. Opening a specific adapter in Mission Control 3 and in PyCosmicSDK: Can multiple devices be used at the same time?
Is there a GUI for the Supernova?
Section titled “Is there a GUI for the Supernova?”Yes. Binho Mission Control 3 is the app for the Binho Supernova, the Binho Pulsar and the Binho Atira. It comes in two forms with the same tools: a desktop app for Windows, macOS and Linux, and a web app at mc3.binho.io for Chromium-based browsers. See Mission Control 3 and Download & Installation.
What is a host adapter?
Section titled “What is a host adapter?”Not answered here?
Section titled “Not answered here?”Try Troubleshooting, or contact us.

